Cooktop Burners - GE JGSP23 Installation Instructions Manual

Installation Instructions
Cooktop Burners
Assembling The Burners
A AUTION: The electrode of the spark igniter is exposed and the
mixer bowl may have sharp edges.
When cleaning the burner bowl, be
careful not to snag the electrode of the
spark igniter with a cleaning cloth.
Damage to the igniter could occur. Be
careful not to turn on any cooktop
controls while cleaning burner bowls. A
slight electrical shock might result, which
could cause you to knock over hot
cookware.
_'_-- Burner Head
Burner Spark Igniter
Bowl
Mixer Tube
(Chimney)
1. Place the Burner Head onto the Burner Bowl.
Line the opening of the Burner Head with the
location of the Spark Igniter.
2. Place the Burner Cap onto the Burner Head.
3. Place the grate over the burner assembly and
burner bowl. The indentations of the bowl
should match the location pins on the bottom
of the grate.
Check for Leaks
Turn the gas supply on and use a liquid leak
detector (soap solution) at all joints and
connections to check for leaks. Do not use an
open flame to look for leaks. Be sure all leaks
are stopped before lighting burners.
10
Pressure Test Information
The maximum allowable pressure for the
regulator is 14" W.C. The minimum pressure
needed to check the regulator setting is 7" W.C.
for natural gas.
A The range and its individual shut-off
valve must be disconnected from the
gas supply piping system during any
pressure testing of the gas supply system
at test pressures of more than 1/2 psig
(pounds per square inch gauge).
The range must be isolated from the gas
supply piping system by closing its
individual shut-off valve during any
pressure testing of the gas supply system
at test pressures equal to or less than 1/2"
psig.
About the Cooktop Burners
Turn each burner on. Flames should be blue in
color with no trace of yellow. The burner flames
should not flutter or blow away from the burner.
The inner cone of the flame should be between
1/2" and 3/4" long.
Cooktop
Burner
/2" to 3/4"
Foreign particles in the gas line may cause an
orange flame at first, but this will soon disappear.