Determining Wall Plate Location - GE JVM2052 Installation Instructions Manual

Installation Instructions
[_] DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
Mounting Plate Tabs
-Touching the Cabinet Bottom
k
III
At least 30", up to 36"
Plate position - beneath framed recessed
cabinet bottom
MountingPlateTabs
Touching the Back
Frame
II1
30" to Cooktop
Plate position - beneath recessed bottom
cabinet with front overhang
Mounting Plate with
Tabs BelowCabinet
Bottom the Same
Distance astheFront
Overhang D epth
...
i II
i II
30" to Cooktop
Your cabinets mag hove decorQtive trim thQt interferes
with the microwave oven installQtion. Remove the
decorative trim to install the microwave oven properly
and to make it level.
THE MICROWAVEOVEN MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets hove a front overhQng onlg, with no
bQck or side frame, install the mounting plQte down
the some distance as the front overhang depth.
This will keep the microwave oven level.
[] MeQsurethe inside depth of the front overhQng.
[_ DrQw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside depth
of the front overhQng.
[_ For this type of installQtion with front overhQng only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
9