I-Sensor Function; Film Mode Function; Reset (Reset To Original Factory Value) - LG AH215 Owner's Manual

Function

I-Sensor Function

1. Press the I-Sensor button of remote control.
2. Press the button to adjust the screen condition as you want.
,
G Each press of the
,
On
G When the I-Sensor function is set to On, Brilliant Color
G You can use this function through the MENU button.
G To exit the menu display, press the EXIT button.
* What is the I-Sensor function?
The projector adjusts its own screen brightness according to changes in surrounding lighting conditions and a
wiewer's color adaptation capability to vividly reproduce the realistic natural colors of objects.
This function may not operate properly if the projector is installed on the ceiling or there are obstacles around it.

Film mode Function

- This function maintains the best screen conditions when a user watches a movie.
For AV and Component 480i, 576i only.
1. Press the MENU button and then use
2. Press the button to select
,
3. Press the button to select On or Off.
,
G Press the MENU button twice or the EXIT button to exit the menu screen.

Reset (Reset to original factory value)

G To return to the factory default settings, select [Reset] with
24
button changes the screen as shown below.
Off
button to select the
,
item.
Film mode
and White peaking functions cannot be used.
TM
menu.
buttons and press
,
Color temp.
Smart picture
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Intelligent sensor
Film mode
Reset
MENU Prev. Move
OK button.
Natural
Presentation
On
Low
Off
Off
Select