DIGITAL AUDIO OUT SETUP
Sending the TV's audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
Connect one end of an optical cable to the TV Digital
1
Audio ( Optical ) Output port.
2
Connect the other end of the optical cable to the digi-
tal audio ( Optical ) input on the audio equipment.
3
Set the "TV Speaker option - Off " in the AUDIO
menu.(
). Refer to the external audio equipment
p p . . 1 1 1 1 9 9
G
instruction manual for operation.
CAUTION
Do not look into the optical output port. Looking at the
G
laser beam may damage your vision.
HEADPHONE SETUP
(Except for 50/60PS70 **, 50/60PS80 ** )
You can listen the sound through the headphone.
Plug the headphone into the headphone socket.
1
2
To adjust the headphone volume, press the
- - button. If you press the MUTE button, the sound
from the headphone is switched off.
+ + or
1
2
35