Panasonic Viera TX-P42ST50E Operating Instrucktion page 26

Timer Programming (DVB)
The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the
external recorder or the USB HDD. At the correct time, the TV will tune to the correct channel even if the TV is in
Standby mode.
1
Select the forthcoming programme
select
set
● LED will turn to orange if
Timer Programming is set.
(Orange LED will flash if the recording
of Timer Programming is in progress.)
"Indicator / Control panel" (p. 11)
■
To check / change / cancel a timer programming event
"Timer Programming" (p. 52 - 54)
■
To return to TV Guide
■
If you select the current programme
A confirmation screen asking whether you want to watch or record the programme appears.
Select [Timer Programming] and set [Ext Rec.] or [USB HDD Rec.] to record from the time you finish the timer
programming event setting.
Das Erste
19:30- 20:00
View Timer Programming
Note
● This function is not available in Analogue mode.
● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or
service provider.
●
No other channel can be selected while the recording of Timer Programming is in progress.
●
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected
to the TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 87, 88) and [Link
Settings] (p. 42) are completed, no setting of the recorder is required. Also read the manual of the recorder.
●
When recording programmes to the USB HDD, be sure to format the USB HDD and enable it to record in [Recording
Setup] (p. 61). For more information of the USB HDD Recording
26
2
Select the function ([Ext Rec.], [USB HDD Rec.] or [Reminder])
(Timer Programming screen)
Timer Programming Wed 26.10.2011 10:46
Function No. Channel Name Date
Ext Rec. D 12 BBC ONE Wed 26.10.2011
<TIMER>
- -- --- --/--
-- - -- - --/--
--- - -- --/--
-- - --- --/--
[Ext Rec.] / [USB HDD Rec.] / [Reminder]
"Set timer programming event details" (p. 53)
select
access
(p. 61, 100)
select
store
Start End
20:00 20:30
(30 min.)
--:-- --:--
(--- min.)
--:-- --:--
(--- min.)
--:-- --:--
(--- min.)
--:-- --:--
(--- min.)