Before Using; Head Cleaning - Panasonic AG-513E Operating Instructions Manual

Professional / industrial video combination vcr models no. ag-513e / ag-520e
Table of Contents

Advertisement

Before Using

Congratulations
on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring
you and your family years of enjoyment.
Please fill in the information below.
The serial number is on the tag located on
the back of your unit.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Accessories
Remote Control
LSSQ0280
Batteries 2 "AA"
Prevent Accidental Tape Erasure
Break off the tab
to protect.
Record Tab
Screw driver
To record again.
Cover the hole with
cellophane tape.
4
Loading the Batteries
2) Insert batteries as marked.
Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.

Head Cleaning

Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor
During playback this
screen appears if clogging
is detected. To remove
screen, press PLAY on
the remote or unit.
• Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape directions carefully.
Excessive use of head cleaning tape can shorten
the video head life.
• If head clog symptoms persist, contact your
nearest Factory Service Center.
Record/Playback Time
Only use tapes with the
Type of Video Cassette
Tape Speed
Setting
T60
SP (Standard Play)
1 Hour
LP (Long Play)
2 Hours
SLP (Super Long Play)
3 Hours
1) Open the cover.
3) Close the cover.
V I DEO HEADS MAY
NEED CLEAN I NG
PL EASE I NSERT HEAD
CLEAN I NG CASSETTE
OR REFER TO MANUAL
END : PLAY
mark in this unit.
T120
T160
2 Hours
2 Hours
40 Minutes
5 Hours
4 Hours
20 Minutes
6 Hours
8 Hours

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-520e

Table of Contents