Connection Of External Equipment; Aerial Socket - LG 15LC1R Series Owner's Manual

Hide thumbs Also See for 15LC1R Series:
Table of Contents

Advertisement

Connection of external equipment

PC INPUT
ANT IN ( 75 )
AV 1
S-VIDEO
AV 2
VCR
PC INPUT
AV 1
AV 2
VCR
PC INPUT
ANT IN ( 75 )
AV 1
S-VIDEO
AV 2
S-VIDEO VCR
26
You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Examples are shown below.
(- This part of Connection of external equipment mainly use pic-
tures for the 23LC1R

Aerial socket

PC SOUND
1. Connect the RF out socket of the VCR to the aerial socket of
H/P
the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
Euro scart socket (VCR)
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode on start of playback, but if you
want to keep on watching in TV mode, press the
ANT IN (
BER buttons.
S-VIDE
Otherwise press the INPUT button on the remote control
handset to select AV1. The VCR play back picture appears on
the screen.
You can also record programmes received by the TV on video
tape.
Note :
a. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart and the
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
b. If the S-VHS signal is received through the S-VIDEO, you must
change to the
C. Please use shielded scart cable.
S-Video/Audio in sockets (S-Video)
PC SOUND
When connecting an S-VIDEO VCR to the S-VIDEO socket, the
H/P
picture quality will be further improved.
1. Connect the S-Video socket of the VCR to the S-VIDEO socket
of the set.
2. Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3. Press the INPUT button to select AV2.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
.)
*
S-Video
mode.
or NUM-
D D
E E
/
AV 1
can be received.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

23lc1r series20lc1r series

Table of Contents