Operating Instructions Recordable DVD Home Theater System SC-RT30 Model No. Positioning and connection of speakers Video connections Radio and AC mains lead connections Channel reception settings and TV aspect settings All necessary steps of setup are completed. Please see the Operations Guide for recording and playback operation.
Positioning and connection of speakers Connect the speaker cables. Included parts to be used Attach the speaker cable stickers (included) to each speaker CENTER FRONT SURROUND 2 Sheets of speaker cable to make connection easier. FRONT SURROUND CENTER cable stickers e.g.
Video connections Included parts to be used Main unit 2 RF coaxial cables Video cable Make sure to use the pair of supplied RF coaxial cables Use the pair of supplied RF coaxial cables only when you make connections to the unit through its RF IN and RF OUT terminals. Striping may appear and disrupt images on the TV if you use different cables for connection.
Page 4
Video connections Connection with a television and digital/satellite receiver or decoder To the aerial Aerial cable Fully wired 21-pin Scart cable Connecting a terminal RF coaxial cable (included) other than the 21-pin Scart terminal ( page 5) Television’s rear panel ( TV ) VHF/UHF RF IN...
Other connections In the patterns “A”– “D”( page 3–4), you can also connect the main unit and TV with the VIDEO OUT, S VIDEO OUT, and COMPONENT VIDEO OUT terminals instead of connecting with a fully wired 21-pin Scart cable. Television's rear panel ...
Channel reception settings and TV aspect settings You can download the tuning positions from the television. After pressing [] to turn the unit on for the fi rst time, the unit starts necessary setup. This unit’s Auto Clock Setting function synchronizes the time when If the setup screen does not appear, press [DVD], and turn the main the TV channel that is broadcasting time and date information is unit off and on again.
Speaker installation options When other Panasonic products respond to this remote control When other Panasonic products placed nearby affect this unit’s remote Attaching to a wall control, change the remote control code on the main unit and the remote control (the two must match).