Auto Programme Tuning; Maintenance; Cleaning The Screen; Cleaning The Cabinet - LG PLASMA TV Owner's Manual

AUTO PROGRAMME TUNING

Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 200. But the number may differ slightly
depending on broadcasting signals.
SETUP
Auto Tuning
●
Auto Tuning
●
Manual Tuning
●
Programme Edit
●
1
Select SETUP.
2
Select Auto Tuning.
3
Select Start.
4
Run Auto tuning.

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of luke-
1
warm water and a little fabric softener or dish washing detergent. Wring the cloth until it is
almost dry, and then use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate
before switching on.

Cleaning the Cabinet

■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Do not to use a wet cloth.
Extended Absence
CAUTION
► If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to
protect against possible damage from lightning or power surges.
Move OK
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
SETUP
Move Antenna
Auto Tuning Auto Tuning
●
●
Manual Tuning
●
Check your antenna connection.
Programme Edit
●
The previous channel information
will be updated during Auto Tuning.
• Use NUMBER buttons to input a 4-digit
password in Lock System 'On'.
• If you wish to keep on auto tuning select
Start using the button. Then, press
the OK button. Otherwise select Close.
OK
Antenna
Start
Close
25