Panasonic TY-ER3D4ME Operating Instructions Manual page 12

2. Bend the frame inwards and pull it off from the side cover.
 If it is diffi cult to pull off, insert a fl at-blade (minus
screwdriver and pry open it.
3. Pull off the battery and separate it from the 3D Eyewear by
cutting off the wires, one by one, with scissors.
 Insulate the wire parts of the removed battery with
cellophane tape.
NOTE
• Take suffi cient care when performing this work so as not to injure
yourself.
• Do not damage or dismantle the battery.
12
Battery
)