Before Operating the Handset
Setting the Date and Time
If you selected "PBX Type-Type 2 (KX-TD series)" in the PBX Type setting, you should
set a date and time.
Press the
Joystick.
Enter Day (01-31), Month (01-12),
Year (00-99), Hour (00-12)
and Minute (00-59) from the left.
• Set the current date and time on the base unit. If you do not do so, the date and
time of incoming calls will not be displayed correctly.
Enabling the Outgoing Call Log
The default setting is "Off" for the Outgoing Call Log. You can enable the Outgoing Call
Log if needed.
Press the
Joystick.
Select
"Outgoing Log".
• Only the numbers you dial, or numbers dialed using Hot Key Dial or Phonebook
will be stored in the Outgoing Call Log.
6
Select "
Setting
Base".
date & time
Select "
Setting
Handset".
Press the
Joystick.
Press the
Select
Joystick.
"Date&Time".
Press the Right
Soft Key to
"AM" or "PM".
Press the
Select "Other
Joystick.
Option".
Enter Password
----
Enter your password.
(default: 1234)
Press the
Joystick.
Press the
select
Joystick.
Press the
Joystick.
Select "On".
Press the
Joystick.