Frequently Asked Questions - Panasonic KX-TG5771 Quick Manual

TG577x_QG(e).fm Page 6 Monday, February 20, 2006 3:22 PM
Continued
Answering system (Base unit)
Feature
Listening to old
messages
Erasing a message
Using the answering
system remotely

Frequently asked questions

Question
How can I increase
handset volume level?
Why is the conversation
noisy or cutting off?
Can I add another
accessory handset to my
base unit?
Can I keep battery
charging all the time?
How can I answer a call-
waiting call (2nd call)?
For further troubleshooting information, visit http://www.panasonic.com/phonehelp or
refer to Operating Instructions.
Operation
When the {MESSAGE} button does not flash on the base
unit, press {MESSAGE}.
Press {ERASE} during playback.
1
Dial your phone number from a touch tone phone.
2
After the greeting message starts, enter your remote
code. (Default remote code is "111".)
L The unit plays back new messages.
L After playing back new messages, the voice guidance starts.
3
Follow the voice guidance as necessary.
Cause/solution
L Press {^} repeatedly while talking.
L Try to relocate the base unit so that distance from location
to use the handset will be minimized.
L Send your unit to service, if your unit has same problem
when the handset is next to the base unit.
L Yes, you can add up to 7 additional accessory handsets
and devices.
L To purchase accessory handsets (KX-TGA570/KX-
TGA571/KX-TGA572) and devices (KX-TGA573/KX-
TGA575),
please visit http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech
impaired users) can call 1-866-605-1277.
L You can leave handset on the base unit or charger
anytime. There is no damage to the battery.
L Press {CALL WAIT} when you hear call-waiting tone.
– –
6