Listening To The Radio - Panasonic SC-HC57 Operating Instructions Manual

Repeat play (
)
[AirPlay]
These modes can be combined with the playback
modes and random play feature.
1
Press [PLAY MENU] repeatedly to select
"REPEAT" and then press [OK].
2
Press [3, 4] to select the following mode and
press [OK].
≥ [AirPlay]: Refer to the connected device to verify the
selected setting.
OFF Select to cancel repeat playback.
1-TRACK The selected track is repeated,
(Skip to the desired track (
([CD], [USB]:
"1, , `" is
displayed.)
ALL All tracks are repeated.
([CD], [USB]:
"`" is
displayed.)
≥ [CD]: Repeat play is cancelled when you open the sliding
door for discs.
≥ [AirPlay]: Perform the settings during playback.
≥ [AirPlay]: The applied settings will remain until it is changed
on the connected device.
, ,
[CD] [USB]
11))

Listening to the radio

You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected. (
A station previously stored is overwritten when another station
is stored in the same channel preset.
Presetting stations
automatically
1
Press [RADIO] to select "FM".
2
Press [PLAY MENU] repeatedly to select
"A.PRESET" and then press [OK].
3
Press [3, 4] to select "LOWEST" or "CURRENT"
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to "Manual tuning and
presetting".
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
Listening to a preset channel
Preparation
1
Press [RADIO] to select "FM".
2
Press [PLAY MENU] repeatedly to select
"TUNEMODE" and then press [OK].
3
Press [3, 4] to select "PRESET" and then press
[OK].
1
Press [RADIO] to select "FM".
2
Press [:/6] or [5/9] to select the
channel.
∫ Manual tuning and presetting
Select a radio broadcast.
1
Press [RADIO] to select "FM".
2
Press [PLAY MENU] repeatedly to select
"TUNEMODE" and then press [OK].
3
Press [3, 4] to select "MANUAL" and then press
[OK].
4
Press [:/6] or [5/9] to tune to the
required station.
≥ To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
8)
(Continues to next page)
RQT9714
13