Once the multi stream function is checked, the MPEG profile setting will be changed to the
Advanced Simple Profile.
RTSP/RTP settings
Perform a multicast setting to send a video and audio to multiple users. (Up to 10 users)
RTP destination IP
Disable Multicast: Do no use the multicast.
Enable Multicast: Use the multicast.
Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255. Although it is empty,
an IP will be entered automatically.
RTP port: Enter a value between 1024 and 65532.
RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower value. On
the other hand, if a network status is poor, enter a higher value. When there are many Network
Cameras or users, a higher value may cause a heavy load to the network. For a detailed setting,
please consult with a network manager.
Language
Language Setting
It will be able to select a user language. The type of language it will be able to select is the English,
the French, the
German, the
Spanish and the Italian.
- 41 -