HOME TECH DVD Player KH 6525 KH 6524 DVD Player Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: KH6524/6525-04/10-V3...
INDEX PAGE 1. Technical Data 2. Intended use 3. Package contents 4. Operating components 5. Setting up of the DVD player 6. Safety instructions 7. Remote control 7.1 Inserting the batteries ..................4 7.2 Using the remote control .
DVD PLAYER KH6524/25 2. Intended use This documentation is copyright protected. The SilverCrest KH 6524/25 DVD player is intended exclusively for stationary Any duplication and/or reproduction, wholly or partially including extracts use in enclosed spaces. The device is intended exclusively for private, as well as the reproducing of illustrations also in modified form is only permit non commercial use.
6. Safety instructions C. Remote control OPEN/CLOSE : Open/Close the disc tray Number buttons • This device is not intended for use by individuals (including children) DISPLAY : Superimpose disc information with restricted physical, physiological or intellectual abilities or deficiences DIMMER : Adjust the display brightness in experience and/or knowledge unless they are supervised by a person...
7. Remote control Danger! Laser radiation! This device is fitted with a „Class 1 Laser“. • Never open the device. 7.1 Inserting the batteries • Never attempt to repair the device. Open the battery compartment on the rear of the remote control. •...
8.1 Connecting to a television via ScartCable/RGB • For playback select the matching channel on your television Check with the television's instruction manual on how you can set the AV channel. Note: • In the OSD menu select the menu option VIDEO/VIDEO OUTPUT/ S VIDEO .
For both variations "YPbPr" and "YUV" you will need 9. Connecting audio components to the • an audio cinch cable (not supplied) DVD player • an YUV cable (not supplied) These can be obtained from your dealer. On the rear panel of the DVD player you will find the connection sockets Y, Pb/Cb and Pr/Cr.
Connection via coaxial cable 9.3 Connecting audio components via an analogue cable To connect the DVD player to a digital audio component with a digital coaxial cable: If a digital input is not available on the audio component you can connect •...
DVD player on. The standby mode is identified by the LED in TV DISPLAY the display on the front panel of the device. ANGLE MARK The device will check to see if a disc is inserted. The SilverCrest logo appears OSD LANGUAGE on the television screen: CLOSED CAPTIONS...
ANGLE MARK 3D SURROUND Select this setting to produce a virtual surround effect from If scenes are recorded on a DVD in different perspectives a stereo or multi channel sound. this will automatically be signified by a camera symbol 5.1 CH Select this setting to activate the analogue 5.1 outputs.
EQUALIZER 10.4 Setup menu DOLBY SOUND MODE Select this menu input if, when playing back sound, you want to use one of the preset equalizer levels ROCK, POP, In this OSD menu you can carry out settings for the Dolby Digital output. LIVE, DANCE, TECHNO, CLASSIC or SOFT.
RESOLUTION In this menu input you can set the different resolutions DISC MENU In this menu input you can set the disc menu language that (480i/480p/576i/576p/720p/1080i/1080p) for the is to be the standard used when playing back films. HDMI output/component video output. PARENTAL In this menu input you can determine the age restrictions.
DVD • Insert the mains power cable into a properly installed mains power socket. player is connected correctly to the television you will now see the Silvercrest POWER •...
If the television, the DVD player and possibly other connected devices (i.e. an audio component) are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the "Silvercrest" logo on the TV screen USB memory sticks (USB) The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity...
Access the DVD menu ( In the display on the front panel of the DVD player, the following notices MENU appear: Note: With DVDs: • "DVD" This function may not be available on all DVDs! If you attempt to execute •...
Page 17
Title number input via the number buttons Audio CD GOTO • During playback press repeatedly the button on the remote control. Note: The following notices appear, one after the other, in which you can enter a time position with the number buttons: This function may not be available on all DVDs! If you attempt to execute DISC GOTO: Enter here a time position on the disc from where playback...
Page 18
Image enlargement (Zoom) Change playback language Note: Note: This function may not be available on all DVDs! If you attempt to execute This function may not be available on all DVDs! If you attempt to execute a a function that is not available, the symbol is displayed on the television function that is not available, the symbol is displayed on the television...
Page 19
During the programmed playback the notice PROGRAM appears in the display. TITLE Select TITLE to continuously repeat the currently playing STOP To delete the programmed playback press twice, during playback, the back title until repeat playback is switched off or playback STOP button on the front panel of the DVD player or on the remote control.
ENTER 1. To open a folder select the folder and press the button. The contents 13. Playback of JPEG-Photo of the folder will be listed. CD/WMA/MP3/MPEG4 2. To reach a higher folder level select the symbol with the entry ".." and ENTER press the button.
A window appears, in which is displayed the copying process with a progress 14. CD Ripping function bar. With the DVD player you can transfer music and speech files in the format CD RIP .cda (CD Audio) or from a disc onto a USB memory stick. Thereby files in Ripping Selected TRACK...
17. Troubleshooting Check whether the settings in the OSD menu match the connection option you have used to connect the audio components to the DVD player. For this see chapter 9. "Connecting an audio component to the Display is blank/DVD player shows no functions even though it is DVD player".
S Video signal as well as a number of control and The Silvercrest KH 6524/KH 6525 DVD player is equipped with an AC 3 auxiliary signals are transmitted. Decoder (for Dolby Digital 5.1 Surround Sound signals).
Dolby Prologic MPEG In comparison to Dolby Surround sound format, with Dolby Prologic an additional MPEG ("Moving Picture Experts Group") refers to a video compression format. channel in the stereo signal is used; this is the so called "Centre" channel. The USB memory sticks corresponding centre loudspeaker is to be situated in the middle between the stereo loudspeakers.
Page 25
Warranty DVD Player KH6524/25 In order to guarantee a cost free repair procedure please DES UK LTD get in touch with the service hotline. Make sure you have Tel.: 0871 5000 700 (£ 0.10 / minute) your sales slip handy. e mail: support.uk@kompernass.com Kompernass Service Ireland Tel.: 1850 930 412...