Mount Into The Dashboard - Philips CE139DR User Manual

Connect the DAB radio receiver
Note
•
The DAB radio receiver and DAB radio antenna are
not bundled. Consult your local retailer for purchase.
•
Make sure that no lead other than the DAB radio
antenna contacts the antenna connector of the DAB
radio receiver.
•
Risk of injury: Never install the DAB radio receiver and
its accessories on the airbag cover.
•
Risk of overheating: Do not fix the DAB radio receiver
to the metal surface of the main unit.
•
Risk of electromagnetic interference: Do not install the
DAB radio receiver over any sensors or vents.
•
Risk of short circuit, malfunction, or damage to this
product: Do not alter the cable of DAB radio receiver
or dismantle the receiver box.
•
Risk of damage to the DAB radio receiver: Never pull
its cable when you remove it.
1
Connect the DAB radio receiver to the
main unit.
2
Connect a DAB radio antenna to the DAB
radio receiver.
EN
8
3
Secure the DAB radio receiver to your car.

Mount into the dashboard

• If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
1
Make sure that the car dashboard opening
is within these measurements: