Table of Contents
Advertisement
English
Powering On from Standby Mode
If you powered the device off by pressing the On/Off button
[page 9, item 1] it will be in standby mode. To power it on,
proceed as follows:
1.
Press and hold the On/Off button [page 9, item 1]
for approx. three seconds.
2.
The main menu (see page 24) will appear and the
status indicator [page 9, item 4] lights green.
22
Button Lock
In the factory-default configuration the button lock is enabled.
If you do not press any button for a few minutes the display
will be locked and the message Locked! Press the button
to unlock. appears. Then tap the button:
Confirm the prompt Unlock? by tapping the button:
Read on page 47 - Touch Lock for how to enable or disable
the button lock.
Navigation Device PNA-M4310
Advertisement
Table of Contents
