Activation; Insertion Of The Operating Unit; Removal Of The Operating Unit (Theft Protection) - Silvercrest CRB-531 Instructions Manual

11 Activation

11.1 Insertion of the operating unit

In order to activate the car radio, you first have to insert the operating unit.
First slide the operating unit tilted slightly from the right onto the left guide pin, as described in the
illustration on the right. Then slide the operating unit onto the right guide pin until it audibly snaps
into place. Now carefully flip the operating unit upwards onto the device until it audibly snaps into
place. Now you can turn on the device.
If the device was turned on when the operating unit was removed, it will automatically turn on again
after the insertion with the last setting (radio, CD, SD/MMC, USB or AUX IN) as soon as the ignition
is turned on.

11.2 Removal of the operating unit (theft protection)

In order to remove the operating unit and thus protect your car radio from theft, turn off the device
with the "PWR/MUTE" button . Afterwards, press the button to flip down the operating unit. Now
the operating unit is released from the device on top and opens into the flipped-open position. Now
remove the operating unit, by first sliding the operating unit slightly to the left and then pulling it
towards you (see illustration). The operating unit then releases from the right guide pin and can
subsequently be detached towards the front. Place the operating unit into the provided case and
take it with you when you leave the car.
19