Enjoying In A Car - Panasonic DVD-LS912 Operating Instructions Manual

Enjoying in a car

Do not leave the unit on a surface that may become hot such as a dashboard. The unit is
not heat-resistant so may malfunction.
The driver must not operate this unit while the vehicle is moving.
Do not operate this unit where it can be viewed by the driver.
Driver operation or viewing of this unit while the vehicle is moving will cause distraction which may
result in serious accident and personal injury or property damage.
Enjoying video in the back seat with the Headrest Mounting Bracket
You can enjoy video in the back seat attaching the unit to the back of the front seat.
≥ Please insert the disc before attaching the unit to the headrest bracket.
≥ Do not attach or detach while driving, and do not attach in the following locations,
otherwise it may result in injury or traffic accidents:
–anywhere other than the back of the seat
–in a location that interferes with the driver's view or operation of the car
–in a location that interferes with the operation of an airbag
–in a location that interferes with the driving instruments
≥ Make sure that the bracket belt is securely fastened, and check the lock on the unit.
In the event of an accident, sudden acceleration, or braking, the unit could become loose and cause injury.
1
Attaching the headrest bracket to the front seat.
Attach to the seat
so that the label
side of the bracket
can be seen from
the rear of the
seat.
2
Attaching the monitor holder.
1 Fold the monitor down towards the front
of the unit and attach the monitor holder.
Detaching the monitor
22
RQT8697
1 Adjust the headrest so there is an open
space of about 3 cm.
Headrest
Mounting
Bracket
(included)
2 Close the buckle and adjust the belt
until it fits tightly around the headrest.
Monitor holder (included)
Press the monitor
holder as shown to
detach it.
Side view
2 Rotate the monitor backwards so the
screen is facing out, and lock into
place with the monitor holder.
After use, detach the monitor
holder from the unit. You can
store it in the bracket.
Check that the
monitor is locked
into position.