Reception Ratio - Sharp AM-400 Online Manual

Using EXT. TEL Mode

Reception Ratio

The machine has been set at the factory to automatically reduce the size of
received documents to fit the size of the printing paper. This ensures that data
on the edges of the document are not cut off. If desired, you can turn this
function off and have received documents printed at full size.
♦
If a document is too long to fit on the printing paper, the remainder will be
printed on a second page. In this case, the cut-off point may occur in the
middle of a line.
♦
Automatic reduction may not be possible if the received document is too
large, contains too many fine graphics or images, or is sent at high
resolution. In this case, the remainder of the document will be printed on a
second page.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Press
reduction, or
size printing.
5
Press
98
) and then press
.
.
(AUTO) to select automatic
(100%) to select full-
repeatedly to exit.
MENU
.
Display:
FAX SETTING
1:RECEPTION MODE
1: AUTO
The display briefly shows
your selection, then:
4: POLLING