Table of Contents
Related Manuals for Panasonic NV-HV62GCS
Summary of Contents for Panasonic NV-HV62GCS
-
Page 1: Table Of Contents
Operating Instructions Video Cassette Recorder Model No. NV-HV62GCS/GC/GCU Contents Page Warning and Important Information Controls and Components Connections Tuning the TV to Your VCR Storing TV Broadcasts in Your VCR Language Setting of the On Screen Display Setting the Clock of Your VCR... -
Page 2: Warning And Important Information
Plus, [Alumina] Head Cleaner further enhanced cleaning such as a book case or similar unit. efficiency. • Based on in-house tests with Panasonic video cassettes. WARNING: Actual head life may vary according to conditions of use, To reduce the risk of fire, electric shock or product tape type, temperature, humidity, etc. -
Page 3: Controls And Components
ENGLISH Controls and Components (20) (34) (16) (17) (18) (19) REC/OTR TIMER REC STOP/EJECT PLAY TRACKING/V-LOCK AV 2 VIDEO IN L–AUDIO IN–R (20) (35) (36) (37) (38) (39) (14) (40) (8) (10)(27) -/- - (37) A CANCEL INPUT SEL AUDIO PROG PLAY (21) (22) TIMER... -
Page 4: Connections
(1) Aerial (Not supplied) ¢ To mains supply (2) TV Set (Not supplied) • If you are using a Panasonic TV, this setting has already (3) Aerial Connector 3 pin mains plug is for Saudi been made, and so you do not need to perform the above (4) RF IN socket (44) Arabia. -
Page 5: Tuning The Tv To Your Vcr
TV displays this pattern. If Auto Tuning stops halfway by turning the VCR off or a power failure, Panasonic VCR Or if the VCR is turned on without the aerial connected and all channels are skipped: RF SELECT [BG] 1 Disconnect the mains lead and then reconnect it. - Page 6 Auto Tuning Using the On Screen Display Manual Tuning Procedure The VCR is tuned automatically by Plug in Auto Tuning. If the VCR is not correctly tuned by Auto Tuning, follow the However, Auto Tuning using the On Screen Display should be procedure below.
-
Page 7: Language Setting Of The On Screen Display
Time Reset Function Language Setting of the If the clock is less than 2 minutes slow or fast, it can easily be reset to the proper time. On Screen Display Example: Select one of the 2 languages displayed: English and Arabic. Resetting the clock to 12:00 1 Press [MENU] (9) to display the Main menu on the TV Preparations... -
Page 8: Option Setting
3 Tape running display Option Setting Stop, Eject Rewind, Review, Index Search:, MENU OPTION TAPE SELECT AUTO LANGUAGE Jet Search6, NTSC INPUT SELECT AUTO CLOCK SET NTSC PB SELECT onPALTV TUNER PRESET JET NAVIGATOR Jet Rewind SYSTEM DELETE NAVIDATA OPTION OSD REC TAPE REFRESH AUTO... -
Page 9: Playback
OSD REC: To set the conditions for the OSD Playback Recording function. • Press [2 1] (28) to select [ON] or [OFF]. Preparations • Confirm that the VCR is on. OFF: Initially set at this position. • Confirm that the TV is on and the VCR viewing channel is This setting enables OSD Recording. -
Page 10: Recording
To Play back S-VHS Cassette Tape Recording (SQPB=S-VHS Quasi Playback) It is also possible to play back tapes recorded in the S-VHS Preparations system. • Confirm that the VCR is on. • Some picture noise may occur depending on the type of •... - Page 11 To Display the Approximate Remaining To Select the Recording Duration and Tape Time Perform Timer Recording (OTR Recording) The remaining tape time can be displayed in the VCR display. OTR means One-Touch Recording and is called this way, 1 Select [TAPE SELECT] from the On Screen Display and because you can start recording and select the recording select the corresponding video cassette tape length.
-
Page 12: Recording From An External Source
Recording from an external source Operations 1 Press [PLAY] (8) to start playback. This function can be used to make up an edited tape from other recordings or video sources. 2 At the point where you want to join a new scene, press A new scene can be added to the end of previous one. -
Page 13: Timer Recording
9 Press [TIMER (REC)] (14) to switch the VCR over to Timer Recording the timer recording standby mode. • When [JET NAVIGATOR] is set to [ON] (see page 8), the [PROGRAMME IS COMPLETE. REMAINING Easy Timer Programming PROGRAMME 49.] message appears. Up to 16 timer programmes, including weekly and daily •... -
Page 14: To Check And Cancel A Timer Programme
Programming a Timer Recording of a TV To delete an I-Timer Programme 1 Press [I-TIMER] (23) then press [34] (28) to select Programme Until its End the timer programme which you want to delete. (Rec Mode Auto Change Function) 2 Press [CANCEL] (5). If the VCR determines that the remaining tape time is •... -
Page 15: Search Functions
To Set the Category Search Functions The category setting allows you to find CATEGORY SETTING what kind of programmes are recorded ≥MOVIE ≥SPORT Jet Navigator by the character and the icon ≥MUSIC ≥CHILD ≥DRAMA ≥NEWS indications. ≥EDUCA ≥OTHER This VCR can display a list of the recorded programmes on ≥DOCUM ≥... -
Page 16: Time Stamp Function
Confirming the cassette which includes a Index signals are automatically recorded in the following cases: programme you want to watch • When you start a recording by pressing [REC] (15) or [REC/ (Jet Navigator Memory) OTR] (39). This allows you to search the cassette which you recorded the •... -
Page 17: Before Requesting Service
• The playback picture is distorted when record the tape in the Before Requesting Service EP mode using MESECAM system. #However, this is not a malfunction. #We recommend PAL system for recording in the EP mode. Message of On Screen Display The error message is indicated in brackets [ Recording will not operate correctly The symptom description is indicated in brackets [... -
Page 18: Specifications
360 mm (W) a 89 mm (H) a 226 mm (D) Dimensions: NTSC colour signal Standard Accessories: Modulation System: 1 pc. AC Mains Lead (for NV-HV62GCS) Luminance; FM azimuth recording 2 pcs. AC Mains Leads (for NV-HV62GC) Colour signal; converted subcarrier phase 1 pc. AC Mains Leads (for NV-HV62GCU) shift recording 1 pc.