Install Setting Menu; Information Menu - Sony QUALINA 004 Owner's Manual

INSTALL SETTING menu (continued)
Background
Selects the background color of the screen
when no signal is input. You can select
"Black" or "Blue."
Test Pattern
When set to "On," a test pattern appears on
the screen to be used when adjusting the
lens with "Focus," "Zoom" and "Shift," or
correcting the screen proportions with "V
Keystone." A test pattern does not appear
when this item is set to "Off."
Lens Control
When set to "On," you can adjust the
projection lens using "Focus," "Zoom" and
"Shift."
After you make this adjustment, it is
recommended that you set this item to "Off"
to avoid any operation of the lens by
mistake.
50
Direct Power On
Sets the power status of the projector when
AC line voltage is supplied.
On:
Select to turn the projector on when AC line
voltage is supplied.
Off:
Select to turn the projector to standby mode
when AC line voltage is supplied.
High Altitude Mode
Off:
Select this when using the projector at
normal altitudes.
On:
Select this when using the projector at an
altitude of 1,500 m or higher.

INFORMATION menu

The INFORMATION menu is used for
checking information such as the frequency
of the input signal. You can display the
settings, but you cannot adjust them.
Example:
����������� �������
��� ����� ���
��� ����� ��
�����
�������
���� ������ �� �
����� ��� ����
�� �������� ���� ���� ���� ���
������ ����� ���� ���� ���� ���
������� �������� ���� ���� ���� ���
��� ������� ���� ���� ���� ���
��� �������� ��� ��� ��� ��� ��� ��
���� ���� �����
����� ����
fH
Displays the horizontal frequency of the input
signal.
fV
Displays the vertical frequency of the input
signal.
Also, the screen resolution and input signal
preset memory No. is displayed.
Lamp Timer
Displays the total number of hours the
projector lamp has been used.
DHCP
Displays whether the IP address is obtained
automatically or not.
IP Address
Displays the IP address of the projector.
Subnet Mask
Displays the subnet mask.
Default Gateway
Displays the default gateway.
DNS Server
Displays the DNS server address.
MAC address
Displays the MAC address of the projector.
51