[Audio Dub.] - Panasonic LUMIX DMC-FX520 Operating Instructions Manual

You can add the audio after taking a picture.
1
Select [AUDIO DUB.] on the [PLAYBACK] mode menu.
2
Move 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
• The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Move 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
•
Audio is recorded from the built-in microphone on the camera.
•
If you press [ ‚ ], the audio dubbing is cancelled.
3
Press [MENU/SET] to stop recording.
•
It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
4
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
Note
•
Audio dubbing may not work properly on pictures recorded by other equipment.
Advanced (Playback)

[AUDIO DUB.]

- 127 -
(P26)