Installing A Built-In Washing Machine - Panasonic NA-140VG3 Operating Instructions & Installation Instructions

Installing a built-in washing
machine
- You need a space at least 60 cm wide.
At least 2 mm of clearance on the sides,
and 3 mm of clearance above and
behind the appliance are required.
- The counter above the appliance
must be firmly fixed to the adjoining
cupboards.
- If the clearance height ranges from 821
to 845 mm, request the sales dealer or
service agent to install a metal cover on
top of the appliance (sold separately),
instead of the standard cover panel.
Metal cover
Note
If you need any accessories, contact
your local Customer Communications
Centre.
Metal cover (AXW4595-7SR0)
NA-168VG3_English.indb 31
Choosing the Right Location
Changing the cover panel
1. Remove the three screws on the back
of the appliance.
2. Slide the cover panel towards the
rear and remove it.
3. Put the metal cover on the top of the
appliance.
Front
4. Secure the metal cover with all of the
screws (14 in total).
Installation Instructions - 31
2011-1-24 11:25:15