LG 42PT25 Owner's Manual page 72

72
CUSTOMIZING SETTINGS
Advanced image options (Depending on model)
Setting
Colour Gamut Advanced Control
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Expert Control
Displays colour domain of the signal.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
EBU: Mode to display EBU standard colour area.
SMPTE: Mode to display SMPTE standard colour area.
BT709: Mode to display BT709 standard colour area.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
xvYCC *This feature is not available for all models.
(available in Cinema This is produces richer colours.
and Expert mode) This feature represents rich colours as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Colour Filter This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
(available in Expert This function is enabled in "Picture Mode - Expert" when you watch DTV.
modes)
Colour Temperature Adjusts the overall colour of the screen by changing the white baseline.
Plasma TV a. Method : 2 Points
LCD TV/
LED LCD
TV
Colour Manage As the tool used by the experts to make adjustments by using the test patterns, this does not
System
affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Yellow/Cyan/Magenta).
Colour difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
This feature is disable in RGB-PC and HDMI-PC mode.
b. Method : 20 Point IRE
Pattern: Inner, Outer
y y y y
Red/Green/Blue
y y
Contrast, Red/Green/
Blue Brightness: The
adjustment range is
y y
-50 to +50. c. Apply to all inputs
b. Method : 10 Point IRE
y y
y y
y y
y y
c. Apply to all inputs
Description
IRE (Institute of Radio Engineers) is the unit to
display the size of the video signal and can be set
among 5, 10, 15 - 100 Plasma TV. You can adjust
Red, Green or Blue according to each setting.
Red/Green/Blue: The adjustment range is -50 - +50.
Pattern: Inner, Outer
IRE (Institute of Radio Engineers) is the unit to
display the size of the video signal and can be set
among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
Luminance: This function displays calculated lumi-
nance value for 2.2 gamma. You can input lumi-
nance value you want at 100 IRE, than the target
luminance value for 2.2 gamma is displayed at every
10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 - +50.