To display clear crisp pictures,
first you must connect your TV correctly
and
also need to choose the correct display
format (see "Changing
the wide
screen mode" on page 38). It is strongly
recommended
to connect the
antenna using the supplied
75-ohm coaxial
cable to receive optimum
picture
quality
signal. A 300-ohm
twin lead cable can be easily affected by radio
noise and the like, resulting
in signal deterioration.
[fyou
use a 300-ohm
twin lead cable, keep it as far away as possible
from the TV.
Making
Video and
Audio Connections
Your TV includes several types of video inputs. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as described below.
Best Video
Performance
H_mi
HDMI
No
(High-Definition
Multimedia Interface)
@
@
@
Component video
,_
p_
po
(480i/480p/720p/1080i)
Yes
woEo@
S VIDEO
L-AUDIO-R
..... @
Composite video
RF/Coaxial
No
.S_ When You connect video equipment to both the VIDEO and the S VIDEO input jacks,
make sure Auto YC in the Setup settings is set to On to view the S VIDEO input (see
page 61).
o
".-.I
17