Sony FD Trinitron WEGA KV-36FV15 Operating Instructions Manual page 18

Connecting S-Link to a VCR
KV-27FV15, 32FV15, 36FV15 only
S-Link automatically powers on the TV and
switches to the correct video input when a
tape is inserted in the VCR.
1 Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
2 Using an S-Link connector (mono mini
plug), connect S-LINK on your VCR to
S-LINK/CONTROL S-OUT in the same
VIDEO IN column on your TV.
AUDIO-R (red)
AUDIO-L (white) _
VIDEO (yellow)
m
VCR
m
m
(Rear of TV)
_ -Y
Connecting S-Link to a satellite
receiver
KV-27FV15, 32FV15, 36FV15 only
When you power on the satellite receiver,
S-Link automatically pov_ers on the TV and
switches to the correct video input.
1 Using A/V connectors, connect AUDIO
and VIDEO OUT on your satellite receiver
to AUDIO and VIDEO IN on your TV.
2 Using an S-Link connector (mono mini
plug), connect S-LINK on your satellite
receiver to S-LINK/CONTROL S-OUT in
the same VIDEO IN column on your TV.
Note
The S-Link feature will override the "SKIP"
VIDEO LABEL input, (see page 22).
I The S-Link connector must be in the same
VIDEO-IN column as the connected AN cables.
Satellite receiver
l
1 _ AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
2
(Rear of TV)
-=r@@
r4_== m
LINK
11