Produktinfo Frying table ..................7 Frying programmes ................8 Additional information on products, accessories, replacement parts and services can be found at www.siemens-home.com and in the online shop www.siemens-eshop.com ã=Safety information Please read this instruction manual carefully. This will enable they do not have the physical or mental ability, ■...
Risk of fire! The hob switches off automatically Never place combustible items on the hob. Risk of fire! ■ Do not keep combustible objects or aerosol cans in drawers If the hob switches itself off and can then no longer be used, it ■...
Getting to know your appliance An overview of the models with their dimensions is given on page 2. The control panel Your controls are equipped with piezo technology. You operate Note: Bending or striking the metal panel, e.g. by knocking a the symbol on the metal bar by pressing it lightly.
Setting a hotplate Set the required heat setting in the settings range. Heat setting 1 = lowest setting Heat setting 9 = highest setting There is an intermediate setting between each heat setting. This is identified by a dot. Setting the heat setting The hob must be switched on.
The hotplate only heats up when necessary. This saves energy. frying using the sensor frying system from your specialist Oil and fat do not overheat. electrical retailer or at www.siemenseshop.com: HZ390230 Notes Both availability and whether it is possible to order online differ Never leave fat unattended while you are heating it.
Frying settings Frying Temperature Suitable for setting high e.g. potato fritters, roast potatoes and rare steaks. medium high e.g. thin food, such as escalope, frozen breaded products, strips of meat, vegetables low - medium e.g. thick food, such as rissoles and sausages, fish e.g.
Childproof lock You can use the childproof lock to prevent children from To switch off: touch the symbol for approx. 4 seconds. The switching on the hotplates. hob is unlocked. Automatic childproof lock Switching the childproof lock on and off This function automatically activates the childproof lock every The hob must be switched off.
Automatic time limit If a hotplate is in use for a long time without the setting being The display goes out when you touch any control. You can changed, the automatic time limit is activated. make new settings. The hotplate stops heating. flash alternately in the When the time limit is activated depends on the heat setting ”...
Changing the basic settings Touch the symbol repeatedly until the desired symbol appears on the left-hand display. The hob must be switched off. Set the desired value on the control panel Switch on the hob. Within the next 10 seconds, touch the symbol for 4 seconds.
Rectifying faults Malfunctions often have simple explanations. Please read the following notes before calling the aftersales service. Indicator Fault Measure Blank There is no power supply. Check the household fuse for the appliance. Check whether there is a power cut by trying other electronic appliances. The metal bar has been bent or struck.
Page 16
Siemens-Electrogeräte GmbH Carl-Wery-Straße 34 81739 München (900929) DEUTSCHLAND...