Contents Page Safety instructions ....................Protection of the environment/Hints and tips............Disposal information ....................Introducing your washing machine ................ 1 - Installation instructions Transportation protection devices ................Moving the washing machine .................. Connections - Water-inlet ..................Connections - Water drainage ..................
Page 3
Your washing machine is distinguished by its economical consumption of energy, water and detergent. Every washing machine that leaves our factory is carefully checked to ensure that it is functioning properly and is free of defects. If there are any questions - especially in regards to installing and connecting your washing machine - please do not hesitate to contact our Customer Service department.
Introducing your washing machine Caution when draining hot water. • for household use only Do not climb onto the washing machine. • for washing machine-washable fabrics in Observe the notes on installation. a detergent and water solution Danger of suffocation! •...
Introducing your washing machine Control Panel Lid handle (remains locked during the programme) Unlocking of detergent dispenser Removable detergent dispenser Button for opening the lid Locking lever (depending upon model) Close drum lid properly! Water drainage hose Nameplate (product and...
Removing the transportation protection devices Before the machine is used for the first time, all transportation protection devices from the back of the appliance must be removed and stored for any later transport (i.e., relocation). 1 Remove the machine from the transport Check to see that both plastic inserts (Figure 1 ).
Removing the transportation protection devices ➀ 5 Remove the protection devices Remove hose retainers and cover ➁ (Figure 3) . the holes with the caps provided To do this: (found in the accessories package) - Remove protective strip (Figure 4) . - With a quarter turn, remove protection device Figure 3...
Connections Cold water supply Figure 6 Connect water-inlet hose (Figure 6). - Minimum water pressure: 0.1 MPa or 1 bar - Maximum water pressure: 1 MPa or 10 bar 3/4” Drain Figure 7.1 Mount drain hose with the supplied elbow, connect to a vented drain (Figure 7.1 / 7.2) .
The washing machine may be damaged. Do not lift the washing machine by any projecting parts (e.g., filler opening). Adjustable feet: In addition to the safety information listed...
International Laundry Care Symbols In order to assist you in taking care of your textiles, these contain a label with the necessary information. The information is given by the following symbols: WASHING (Washtub) Normal Gentle Normal Gentle Normal Gentle Special Gentle Hand do not...
To avoid the danger of a fire or explosion: ( * ) When using the solutions mentioned above, rinse the articles thoroughly before putting them into the washing machine. - Strictly follow the manufacturer's instructions when using common stain removers.
Foreign objects (e.g. coins, paperclips, - small laundry items, e.g. socks or needles, nails) may damage laundry handkerchiefs items or washing machine components - underwired bras (underwires may (the drum for example). become detached during washing and • Empty the pockets of the laundry items.
Foreign objects in the washing drum promotes creasing. may damage laundry. Check the drum Water and energy consumption by the for foreign objects before putting in the washing machine is automatically reduced laundry. for smaller loads. • Close drum lid.
Setting the programme Programme selector Status indicator Start/Pause button Additional function buttons Spin speed selector (depending upon model) Display lights and the position of Selecting the programme: the spin speed selector ”Washing“ display light blinks. •Select the desired programme using the programme selector. •...
Topping up laundry + changing programmes Changing the programme Terminating the programme If you have chosen the wrong programme: If you would like to terminate a programme before it is completed: • Turn programme selector to ” Off”. • Set programme selector to ” Off”. •...
Selecting the programme Basic programme Quick 40 Select the desired programme - also see the For a load of lightly soiled laundry items up to programme chart. 2.5 kg. To freshen up cottons, linens, coloureds For the maximum spin speed of the or hard-wearing synthetics.
Additional function buttons PREWASH RINSE STOP (depending upon model) For heavily soiled, hard-wearing textiles, For delicate textiles and curtains. The e.g. from cotton or linen. laundry remains in the final rinse water. The Prewash washing temperature is The laundry goes through an in-between 30°C.
Safety features Lid opening safeguards: Spin safeguards: After the programme starts, the appliance The washing machine is equipped with lid is locked. a safety feature that can reduce the spin speed if imbalanced loading occurs. After the programme ends or during In this case, the laundry may be ”Rinse Stop”, the lid is unlocked.
Completely disconnect the washing simultaneously ( Figure 10 ). The dispenser machine from the mains. then detaches itself from the chamber Never clean the washing machine with a (Figure 10) . jet of water. - Remove components at the rear of the...
Cleaning the filter (depending upon model) Cleaning the pump filter • Gently turn the drum with the open lid to front side of the machine (Figure 14) . This filter collects bits of fluff and small objects, i.e. detached buttons that have Figure 14 fallen into the container.
Cleaning the filter (depending upon model) - Remove this part from its holder (Figure 19). Cleaning the pump filter This filter collects bits of fluff and small Figure 19 objects, i.e. detached buttons that have fallen into the container. To clean, proceed as follows: - Turn the drum so that the closed drum lid is on the bottom: A plastic part can be seen...
Troubleshooting minor faults The washing machine indicates malfunctions via blinking indicator lights. Blinking indicator lights Cause / Remedial action No water flows in. Open tap and press the ”Start/Pause” again. This malfunction may be caused by an improper water supply hose connection (see chapter "APPLIANCE CONNECTIONS: Water-inlet...
Page 24
- Pull out mains plug for 10 s - Reinsert mains plug - Select programme and start again. If the indicated fault remains, the service department is to be notified. SUGGESTION: Disconnect washing machine from mains and turn off tap.
The lid remains locked during the entire time of the programme. The drum lid opens too • The washing machine has not been used for a long time. slowly • The washing machine is in a room that is too cold.
Customer Service Every washing machine that leaves our factory is carefully checked to ensure that it is functioning properly and is free of defects. If there are any questions - especially in regards to setting up and connecting the washing machine - our Customer Service is at your disposal.