Table of Contents
Advertisement
Error indicators and warnings
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Display
The disc is not loaded.
The disc is scratched or dirty and cannot be recog-
nized.
The disc is loaded upside down.
The disc is scratched or dirty and cannot be played.
The disc does not satisfy the standards.
The disc is scratched or dirty and data cannot be
read.
The disc does not satisfy the standards.
The optical pickup cannot be located.
Set this unit to the stand-by mode and turn the power
on again. (*)
The unit considers the DVD mechanism is defective.
Place the unit away from noise source or plug the
AC power cord to another AC outlet. (*)
The TV screen does not display correctly.
Place the unit away from noise source or plug the
AC power cord to another AC outlet. (*)
The digital audio input jack is not connected proper-
ly.
Unspecified signal is received and cannot be recog-
nized.
The temperature is too high.
Set this unit to the stand-by mode and wait for a
while.
The speaker is not connected properly.
The amplifier is defective.
Set this unit to the stand-by mode and turn the power
on again. (*)
The amplifier is defective.
Set this unit to the stand-by mode and turn the power
on again. (*)
Meaning
(*): Should the same message appear even if the unit is unplugged and plugged in or
is set to the stand-by mode and on again, contact your local dealer where you pur-
chased the unit.
0 1
0 1
NO DISC
0 1
1
O
ON
G
ON
S
1
O
ON
G
ON
S
Display
Meaning
The amplifier is defective.
Place the unit away from noise source or plug the
AC power cord to another AC outlet. (*)
The cooling fan on the back of the main unit does not
run due to foreign objects caught in it.
Set this unit to the stand-by mode and remove the
foreign objects around the fan.
TV screen
The disc cannot be played with this unit or the
disc is loaded in an incorrect way.
1 5
/
C
WRO NG D
I S
C
T
Y P
E
8 3
/
0
:
2 3 4 0
:
The region number of the DVD is not "1" or
"ALL".
1 5
/
C
R EG
I O
N
CO E
D
E R OR
R
8 3
/
0
:
2 3 4 0
:
A disc has not been loaded.
1 5
/
C
8 3
/
0
:
2 3 4 0
:
You are trying to perform an incorrect oper-
1 5.
h c
0
0
10
N
ation.
BIT RATE
NO T
Mbps
A L OWE D
L
SELECT
The operation is prohibited.
ENTER
ENTER
RETURN
The disc does not support the operation de-
1 5.
h c
0
0
10
N
scribed in this operation manual.
BIT RATE
A CC
E S
S
Mbps
SELECT
D E
N
I E D
ENTER
ENTER
RETURN
02/11/20
SD-SH111(U)E7.fm
SD-SH111
ENGLISH
Meaning
E-66
7
Advertisement
Table of Contents
Troubleshooting
