Maintenance; Specifications; Audio Input - Sharp CP-SW1000W Operation Manual

Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug
and plug in the subwoofer, and then turn the power on.

Maintenance

Cleaning the cabinet
Periodically wipe the cabinet with a
soft cloth.
Caution:
Do not use chemicals for cleaning
(petrol, paint thinner, etc.). It may
damage the cabinet finish.
Do not apply oil to the inside of
each component. It may cause
malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 110 - 240 V ~ 50/60 Hz
Power consumption Power on: 18 W
Power stand-by: 0.6 W(*)
Amplification system Subwoofer: Pulse width modulation
Output power RMS: 100 W (50 W + 50 W) (10% T.H.D)
RMS: 90 W (45 W + 45 W) (0.9% T.H.D)
Audio input terminal Analog input: RCA type x 1 pair (L/R)
Type Subwoofer system
Impedance 4 ohms x 2
Dimensions Width: 430 mm (16-15/16")
Height: 151 mm (5-15/16")
Depth: 323.5 mm (12-3/4")
Weight 6.4 kg (14.11 lbs.)
Crossover frequency 80 Hz - 220 Hz
( * ) This power consumption value is obtained when in the power
stand-by mode.
CP-SW1000W
ENGLISH
E-10