Tuning Into A Radio Station - Kenwood KRF-V6400D Instruction Manual

Tuning into a radio station

This unit can store up to 40 stations in the memory and recall
them by one-touch operation.
Radio stations can be classified into RDS (Radio Data System)
stations and other stations. To listen to or store RDS stations in
the preset memory see <Using RDS (Radio Data System)> ›.
Be sure to connect antennas to receive radio broadcasts. (See
<Connecting antennas> ).)
BAND
AUTO/MONO
MULTI CONTROL
BAND
TUNER
1
Set the input source to TUNER.
2
Use [BAND] to select the broadcast band.
Each press switches the band as follows:
1 FM
2 AM
3
Use [AUTO/MONO] to select the tuning method.
Each press switches the tuning method as follows:
Setting Operation
Auto tuning The next station is tuned automatically.
Manual tuning Select a station manually.
Normally, set to "AUTO" (auto tuning). If the radio waves are
weak and there is a lot of interference, switch to manual
tuning. (With manual tuning, stereo broadcasts will be
received in monaural.)
INPUT SELECTOR
MULTI CONTROL
/
AUTO/MONO
TUNING
/
Indicator
"AUTO" lit
"AUTO" not lit
4
Use [TUNING 1/¡] to select the station.
"TUNED" lights when a broadcast is being received.
"ST" lights when a broadcast is being received in stereo.
• [MULTI CONTROL ∞/5] can also be use to select a
station.
33
English