Your New Washing Machine Filling laundry detergent and/or additive dispensers Chamber I: Detergent for prewash, starch, or pre soaking agent. Chamber II: Detergent for main washing period, water softener, bleach and stain removing salt. Chamber: Additives, e.g. fabric softener or former (fill at least to lower edge of insert 1).
Control panel 2. Control lights illuminate 1. Select a programme Can be turned in both directions. I Ready" when programme is selected. Switches on / off the washing ma Active" when Start" is pressed. chine. End" when programme is finished. The programme selector cannot be Flashing control lights = operating fault.
Selecting Programmes Basic programmes 90 C Cottons + Linens 60 C Intensive Stains 60 C Cottons + Linens with Prewash 30, 40, 60 C Cottons + Linens 30, 40, 60 C Easy care 30 C Delicates 30 C, Woollens cold...
Page 17
Extra cycle Rinse programme selector Spin Drain Additional function Rinse hold p Quick Wash Additional function r Rinse Plus...
Troubleshooting Minor Faults Risk of electric shock! Fault Cause ction Rinse hold" was selected. Select Drain" or Spin". The loading door cannot be opened. Safety function is active. Wait for 2 minutes. Clean and dry the detergent Detergent residue in the Detergent was damp or lumpy.
Page 30
Fault Cause ction This is not a fault. Wash large and small items The programme takes The imbalance compensation together to reduce imbalances. longer than usual. system is attempting to balance the load by distributing the laundry more evenly. The foam detection feature has Add a more appropriate amount of activated an additional rinsing cycle detergent next time.