WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger.
Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with luke- warm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish.
Internal thermometer This indicates the internal temperature of the freezer. It may indicate a temperature above -18¡C when large quantities of food are placed inside for freezing or when the door is left open for a long time. Blue: normal Red: alarm PR202 Freezing fresh food...
HINTS Hints for storage of frozen food Hints for freezing To obtain the best performance from this appliance, To help you make the most of the freezing process, you should: here are some important hints: ¥ make sure that the commercially frozen ¥...
MAINTENANCE Unplug the appliance before carrying out Periods of non-operation any maintenance operation. When the appliance is not in use for long periods, Periodic cleaning take the following precautions: Clean the inside with warm water and bicarbonate of remove the plug from the wall socket; soda.
CUSTOMER SERVICE AND SPARE PARTS To obtain fast service, it is essential that when If the appliance is not functioning properly, check you apply for it you specify the model and serial that: number of your appliance which can be found ¥...
I nstructions for totally built-in appliances 50 mm Dimensions of the recess Height 880 mm Depth 550 mm Width 560 mm min. The applianceÕs door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the D567 bottom.
Page 10
Press in the joint covers between the appliance and the kitchen unit. D724 Apply covers (B) on joint cover lugs and into hinge holes. D726 Position the runners (A) at the top and bottom of the inside of the kitchen unit as shown in Fig. and mark the position of the external holes.