Table of Contents
Advertisement
If you do not see anything on the screen or if you do not
select "OK" within ten seconds, video output setting will be
returned to previous setting automatically.
If "PROGRESSIVE" is selected in the VIDEO OUTPUT menu
and the unit is connected to a standard (analog) TV, no
video output will be seen on the screen.
To cancel the PROGRESSIVE mode:
Press OPEN/CLOSE button and then TIME button. After that,
enter the 3-digit number, "784" using number buttons. The
video output will be restored to the standard setting and a
picture will once again be visible on a conventional analog
TV.
AUDIO SETUP
It is impossible to connect speakers directly to this DVD
player unless an AV amplifier is used.
COMPRESSION:
Boosts frequency response. This item can be selected
between "OFF" to "MAX".
LPCM OUTPUT:
This item can be selected as "LPCM 48K" or"LPCM 96K" .
LANGUAGE SETUP
Audio, disc menu and subtitle items will not be available if
the player is in RESUME (Pre-Stop) mode.
OSD LANGUAGE:
You can select the default OSD language of the player
menus.
AUDIO:
You can select the default audio language if supported by
that DVD disc.
SUBTITLE:
You can select the default subtitle language if supported by
that DVD disc.
DISC MENU:
You can select the DVD's disc menu language among
thes e languages. Disc menu appears in the selected
language, if supported by that DVD disc.
PARENTAL SETUP
PARENTAL SETUP page will not be available if the player is
in RESUME (Pre-Stop) mode.
Playing some DVDs can be limited depending on the age of
users. The "Parental Control" function allows playback
limitation level to be set by the parents.
PARENTAL SETUP (Parental Level):
Parental Level can be adjusted to one of the eight levels or
"NO PARENTAL". "NO PARENTAL" or level "8 ADULT"
adjustments let you watch all of the DVD titles ignoring the
DVD disc's parental level. You can watch the DVD discs,
which have the same or lower parental level than the
player's selected level only.
PASSWORD:
Password to change the parental level can be set by using
this option.
Factory preset of the password is "0000". You have to set
a 4- digit password when you select a parental level for
the first time.You have to enter your password every time
you want to change the parental level. If you forget your
password, please contact technical service.
Change Password:
Using this item you can change the current password.
To change the password, you will be prompted to enter
your old pass word. Af ter you have entered your old
password, you can now enter the new 4-digit password.
You can use CLEAR key to delete the incorrect entry.
Press OPEN/CLOSE to activate parental setup setting
PREFERENCES
ANGLE MARK, SMART NAVI and DEFAULTS items will not
be available if the player is in RESUME (Pre-Stop) mode.
ANGLE MARK:
This option allows you to turn ON/OFF the angle mark on
the screen, which is displayed to indicate that a multi angle
scene has started. It also shows which angle you are
currently watching.
STANDBY TIME:
Standby activation time can be adjusted or standby can be
disabled when using this option. Standby can only be
activated when one of the time option is selected and no
button is pressed during the selected time duration in stop
mode.
SMART NAVI:
This option allows you to enable or disable the SMART
NAVI, which is used for playing MP3, MPEG, MPEG4, DivX
or JPEG CDs.
TRANSPARENCY:
Using this option to select one of the transparency levels
for on screen display.
- 30 -
®
ENG
Hide quick links:
Advertisement
Table of Contents
