Toshiba D-VR16SB Owner's Manual page 22

Introduction
Preparation of the remote control (cont'd)
VCR / DVD recorder Switching
Because this product is a combination of a VCR and a
DVD recorder, you must first select which component
you wish to operate with [VCR/DVD] on the front panel.
REC
VCR
ON / STANDBY
VCR/DVD
VCR DVD
VCR mode
Press [VCR] on the remote control.
(Verify that the VCR indicator is lit.)
DVD mode
Press [DVD] on the remote control.
(Verify that the DVD indicator is lit.)
Notes:
• Pressing only [VCR/DVD] on the front panel DOES
NOT switch the mode of the remote control. You
MUST select the correct mode on the remote control.
• Press [VCR/DVD] to select the DVD mode or the VCR
mode.
• You cannot switch to the mode (DVD or VCR) that is in the
timer-standby mode.
• If the media is available, you can start recording by
pressing [REC I] (DVD) or [REC I] (VCR) on the remote
control even if another equipment (DVD or VCR) is
selected. In this case, the mode of the remote control will
be automatically switched to the appropriate component.
22 EN
PROGRAM
DUBBING VCR/DVD REC
DVD
VCR DVD
DVD indicator
VCR indicator