EJU00705
ENGINE STOP SWITCH
The engine can be stopped normally by
pressing the red button
EJU00706a
ENGINE STOP LANYARD SWITCH
The engine can be also stopped if you fall
off, or in case of an emergency, when the
GU2018
lock plate
pulled out from the engine stop lanyard
switch
.
Should the lock plate be removed for any
reason, the engine stops by itself.
Always attach the engine stop switch
lanyard (cable) to your left wrist
BEFORE starting the engine.
GU2017
To prevent accidental starting of the
engine, always remove the lock plate
from the stop switch when the engine
is not running.
NOTE:
When the red button on the engine stop
switch is pushed, without removing, the
lock plate ignition circuit opens and stops
the engine immediately.
GU2019
EJU00350
CHOKE KNOB
Pulling this knob supplies a rich fuel-air
mixture required to start the engine.
NOTE:
Refer to Starting the engine on page 3-11
to 3-13 for proper operation.
GU2020
Choke knob
2-7
.
attached to the lanyard
E
is