Yamaha BANSHEE Owner's Manual page 122

Changing the settings of the carburetors
To change the settings of the carburetors, you
need to disassemble and remove them. Follow
the procedures for both carburetors.
Disassembling and removing the carburetors
1. Turn the fuel cock to the "OFF" position.
2. Turn out the carburetor drain screw to
drain the fuel.
3. Remove the seat.
4. Remove the radiator cover and side cover
by removing the screws.
3
1
4
3
1. Radiator cover
3. Screw (× 3)
5. Disconnect the fuel hoses.
4
4
4
2
2. Side cover
4. Screw (× 4)
6. Remove the fuel tank by removing the bolts.
1
2
2
1. Fuel tank
7. Remove the air filter case cover by
unhooking the fasteners.
8-21 1. Air filter case cover
2
2
2. Bolt (× 4)
2
2
1
2. Fastener (× 4)