The tires listed below have been approved by
Yamaha Motor Manufacturing Corporation of
America for this model.
Manufacturer
Front
MAXXIS
Rear
MAXXIS
Size
Type
25 × 8-12NHS
M951Y
25 × 10-12NHS
M952Y
EVU00940
Wheel installation
1. Install the wheel and the nuts.
The arrow mark
G
point toward the rotating direction of
the wheel.
Tapered nuts are used for both the
G
front and rear wheels. Install the nut
with its tapered side towards the
wheel.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts to the specified
torque.
WARNING
Do not reverse the rims on the Rhino to
widen the track width. Installing wheels
improperly increases the risk of wheel fail-
ure and accidents.
8-43
on the tire must