Advertisement
Palm Routers
O1J "J" Roller for Palm Router
• Designed especially for laminate installers.
• The aluminum handle is designed to place the necessary
pressure over the roller, with minimum effort.
• The solid non-marking roller is recessed on the
end for rolling near walls or backsplashes.
• 1-1/2" Dia. x 3" W x 14" L
PR002 Straight Edge Guide
for Palm Router
• Guides router along edges of workpiece
or to up to 3-5/8" in from edge
• Includes mounting hardware
PR004 Offset Base with Roller Guide for Palm Router
• Offset Base with Spindle Lock - Allows routing
near vertical surfaces, such as when trimming
laminate applied to top of countertop backsplash
• Quick-Clamp System - Allows motor to be easily
adjusted or moved from base to base
• Spindle lock - For easy bit changes
• Durable aluminum and steel construction
• Includes Base Cover, Phenolic Subbase,
1/4" Self-Releasing Collet, Drive Gear, Special
roller guide for PR004 and Comfortable Forged Wrench
PR006 Underscribe Plate with
Wrenches for Palm Router
• Underscribe Attachment - Mounts to fixed
base for creating precise seams between
sheets of laminates
• Easy front-to-back adjustment
• Shield at bottom of bit recess prevents
bit from hitting guiding piece of laminate
• Includes Guide Plate, Adjustment Cam, Adjusting Tool, Wrench, Hardware
PR008 Base Cover for Palm Router
• Provides extra insulation from heat
in heavy-use situations
PR010 Palm Router Subbase for use
with Threaded Templet Guides
• Accepts threaded templet guides (not included)
• Precision Centering Design allows accurate
positioning of bit within subbase and templet
guides - Makes it easy to follow intended cut line
when using jigs, templets, dovetail fixtures and
similar guidance devices
• Smooth, long-wearing phenolic construction
• Includes mounting screws
110
Boschtools.com
Att a chmen ts
Pa l m Rou te r
Toll Free: 877-BOSCH-99
PR001 Fixed Base for Palm Router
• Quick-Clamp System - Allows motor to be easily
adjusted or moved from base to base
• Enhanced Bit Capacity - Fixed Base accepts bits
up to 1-5/16" in diameter
• Finger Support Pockets - For additional stability,
especially when trimming edges
• Includes Phenolic Subbase
PR003 Roller Guide for Palm Router
• Guides router when non-bearing bit
or unpiloted bit is used
• Includes mounting hardware
PR005 Tilt Base for Palm Router
• Tilt Base with Detents at Key Angles - Allows routing
at special angles and in hard-to-reach areas
• Quick-Clamp System - Allows motor to be easily
adjusted or moved from base to base
• Tool-Less Tilt Adjustment Range of 70° - 30° to 45°
• Detents every 7.5° - For easy setting of common angles
• Fast & Precise Depth Adjustment System
• Durable aluminum and steel construction
• Includes Phenolic Subbase
PR007 Side-Handle Subbase with Dust Extraction Port
• Side Handle - Provides additional gripping
location for support of router
• Includes vacuum hose port and dust
extraction hood for user when edge-forming
• Accepts Bosch VAC005-VAC008 and VAC021
Vacuum Hose or standard 1-1/4" & 1-1/2" hoses
• Can be used with PR006 Underscribe Attachment for creating precision
seams between two sheets of laminates. Connection to dust extraction
system provides excellent means to prevent chips from getting under
laminate sheets and into glue.
• Not for use with templet guides
• Includes Offset Subbase with Side Handle, Hose Port, Dust Collection
Hood for use when edge-forming, Two sets of attachment screws, Mounting
Screws, VAC002 Vacuum Hoses Adapter
PR009 Palm Router Subbase for use with Bosch
RA-Series Templet Guides
• Accepts Bosch RA-Series templet guides (not included)
• Precision Centering Design allows accurate
positioning of bit within subbase and templet
guides - Makes it easy to follow intended cut
line when using jigs, templets, dovetail fixtures
and similar guidance devices
• Smooth, long-wearing phenolic construction
• Includes mounting hardware
Advertisement
