Preventing The Handles From Touching The Wall; Removing The Stand Guide Frames; Using The Wall Mount Spacers - Mitsubishi Electric MDT5525 User Manual

P-2 Installing the monitor (continued)
Preventing the handles from
touching the wall
By attaching the handles in the opposite orientation, you can
reduce the depth of the monitor.
1. Remove the screws that are holding the handles.
Normal handle position
Handle
Screws
Screw x 4
2. Attach the handles in the opposite orientation and secure
them using the screws you have removed in step 1.
Handle position for shallow depth
Handle
Screws
Screw x 4

Removing the stand guide frames

By removing the stand guide frames, you can reduce the depth
of the monitor.
1. Remove the screws that are holding the stand guide frames.
Screws
Screw x 4
Stand guide frame
English-15
2. Slightly move and remove the stand guide frames.
NOTE:
• Retain the stand guide frames and the screws that you have
removed because they are necessary to install the monitor
using the option stands.

Using the wall mount spacers

When the option slot cover or the stand guide frames touch
the wall or block the heat dissipating holes in the rear of the
monitor, use the wall mount spacers (accessories) to mount the
metal bracket (commercially available).
1. Put the wall mount spacers (9 pcs.) between the metal
bracket and the wall mount screw holes of the monitor and
attach them using screws (a).
(a)
Wall mount spacer
(accessory)
(a): Screw for attaching the wall mount spacer (M6, 9 pcs.)
For mounting, use M6 iron screws (with a loose-proof
spring washer, long enough to accommodate the thickness
of the metal bracket and that of the wall mount spacer
(17 mm) and penetrate the monitor to a depth of 10 mm) and
tighten them securely.
Metal bracket
17 mm
Monitor
Stand guide frames
Carry out as necessary
Screw
Wall mount spacer
(accessory)
10 mm
339
Option slot cover
(accessory)