Table of Contents
Advertisement
Installation
Unpacking
Slide out the polythene bag with the polysty-
rene stuffing before using the appliance Pull off
adhesive strips from inside machine on top of
Should the appliance be moved, it must be
transported vertically. The appliance must
not be installed behind a lockable door, a
sliding door or a door with a hinge on the
opposite side to that of the appliance.
Positioning
It is recommended that, for your convenience,
the machine is positioned close to your washing
machine. The tumble dryer must be installed in
a clean place, where dirt does not build up. Air
must be able to circulate freely all round the
appliance. Do not obstruct the front ventila-
tion grille or the air intake grilles at the back of
the machine. To keep vibration and noise to a
minimum when the dryer is in use, it should be
placed on a firm, level surface. Once in its per-
manent operating position, check that the dryer
is absolutely level with the aid of a spirit level. If
it is not, raise or lower the feet until it is. The feet
must never be removed. Do not restrict
the floor clearance through deeppile carpets,
strips of wood or similar. This might cause heat
build-up which would interfere with the opera-
tion of the appliance.
Important
The hot air emitted by the tumble dryer can
reach temperatures of up to 60°C. The appli-
ance must therefore not be installed on floors
which are not resistant to high temperatures.
When operating the tumble dryer, the room
temperature must not be lower than +5°C and
higher than +35°C, as it may affect the perfor-
mance of the appliance.
Stacking kit
A special stacking kit is available through your
dealer, to enable the mounting of the dyer on top
of a front loading washing machine with cover's
depth between 48 and 60 cm. Read carefully
the instructions supplied with the kit.
Door reversal
To make it easier to load or unload the laundry
the door can be reversed.
Tumble Dryer
21
Hide quick links:
Advertisement
Table of Contents
