Adjust Color And Lighting - Nokia N92-1 User Manual

To set the camera to take pictures in low light conditions,
select Options > Night mode.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer
activate the self-timer, select Activate. The self-timer
indicator ( ) blinks and the device beeps when the timer
is running. The camera takes the picture after the selected
delay elapses.
You can also use the self-timer in the sequence mode.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic,
and Off ( ).
To use the flash, select Options
and the desired delay. To
On (
> Flash > On.

Adjust color and lighting

To enable the camera to reproduce colors and lighting
more accurately, select
options:
Flash (images only)—Set the flash according to the
lighting conditions. See 'Flash', p. 27.
Adjust > White balance—Select the current lighting
condition from the list. This allows the camera to
reproduce colors more accurately.
Adjust > Colour tone—Select a color effect from the list.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings do, however,
transfer between the image and video modes.
Adjust still image camera settings
),
To change the main settings, select
Image, and select from the following options:
Options and from the following
Options > Settings>
27