Shutoff Valve - GE Profile 23 Owner's Manual And Installation

INSTALLING THE WATER LINE
TURN THE WATER ON AT THE
10

SHUTOFF VALVE

Tighten any connections that leak.
Replace access cover.
PLUG IN THE REFRIGERATOR
11
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.
Installation Instructions
30
(CONT.)
START THE ICEMAKER
Set the icemaker power switch to the l (on) position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (–9°C)
or below. It will then begin operation automatically
if the icemaker power switch is in the l (on) position.
Power
switch
NOTE: In lower water pressure conditions, the
water valve may turn on up to 3 times to deliver
enough water to the icemaker.