Page 1
FAX-1360 Before you can use the machine, you must set up the hardware. Please read this Quick Setup Guide for the correct setup procedure. Setting Up the Machine Setup is Complete! Keep this Quick Setup Guide and the User’s Guide in a convenient place for quick and easy reference...
Symbols used in this guide Caution Improper Setup Warning Warnings tell you what to do to prevent Cautions specify procedures you must Improper Setup icons alert you to possible personal injury. follow or avoid to prevent possible devices and operations that are not damage to the machine or other objects.
Getting Started Carton components Carton components may vary from one country to another. Save all packing materials and the carton in case for any reason you must ship your machine. Handset Curled Cord User’s Guide Power Cord Quick Setup Guide Telephone Line Cord One Touch Labels Telephone Handset...
Setting Up the Machine Pull the paper tray completely out of the Removing the protective machine. If the paper support flap (1) is open, parts close it. Open the output paper tray cover (2). Remove the protective tape. Installing the Handset Connect the curled handset cord to the machine and the other end to the handset.
Page 6
Setting Up the Machine Fan the stack of paper well to avoid paper jams Slowly push the paper tray completely into the and misfeeds. machine. Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray.
Setting Up the Machine Note Connecting the phone line If you are sharing one phone line with an external telephone answering machine, connect it as shown below. Connect the telephone line cord. Connect one end of the telephone line cord to the socket on the machine marked LINE and the other end to a modular wall socket.
Setting Up the Machine Note Installing the ink cartridge Do not throw away the yellow protective part. You will need it if you transport the machine. Warning Take out the ink cartridge. If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor.
Lift the lock release lever and gently push until • Brother multifunction machines are designed to it clicks, and then close the ink cartridge cover. work with ink of a particular specification and will work to a level of optimum performance when used with genuine Brother branded ink cartridges.
Setting Up the Machine Check the quality of the block on the sheet. Setting the LCD contrast Check that the dotted lines are all visible with no gaps. If OK select (Yes) at the control panel. If gaps are visible select (No) at the control panel to start the cleaning process and follow the prompts at the LCD. You can adjust the LCD contrast for a sharper and more vivid display.
Setting Up the Machine Setting the date and time Setting your station ID The machine displays the date and time, and if you You should store your name and fax number to be set up the station ID, the date and time displayed on printed on all fax pages that you send.
Setting Up the Machine Setting tone or pulse dialling Choosing a Receive Mode mode There are four possible receive modes: Fax Only, Fax/Tel, Manual and External TAD. Your machine comes set for a Tone dialling service. If you have a Pulse dialling service (rotary), you need to Do you want to use the telephone features of your change the dialling mode.
Consumables Replacement consumables Ink cartridge Black LC960BK...
Page 14
The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.