Menu Item N: Set Panel Table (For Router Mode) - Sony MKS-8080 Operation Manual

Examples of a destination offset local
phantom
Use this type of phantom when there are multiple
destination select buttons, or when you want to always
select a specific source in the same pattern even if the
destination is changed from an X-Y control panel.
Example 1
A source (audio source AUD007 for example) of a level is
to be assigned to multiple sources of another level (video
source IN001 and IN004 for example).
Source name for each level
Setting of destination- offset local
Source LEVEL 1 LEVEL 2
phantom
name
IN001 IN001 AUD007 IN001: DST+000<IN001-10000000
IN001: DST+000<AUD007-01000000
IN004 IN004 AUD007 IN004: DST+000<IN004-10000000
IN004: DST+000<AUD007-01000000
Example 2
A pair of crosspoints (multiple audio channels, video key
signals for example) is to be set.
Setting of Destination Offset Phantom
IN001: DST+000<IN001-10000000
IN001: DST+001<IN002-10000000
IN003: DST+000<IN003-10000000
IN003: DST+001<IN004-10000000
IN 1 IN 2 IN 3 IN 4
Menu Item N: SET PANEL TABLE (for
Router mode)
Purposes
Menu item N enables you to set which source or
destination is to be selected with which source/destination
select button in RTR mode.
For a button to be used for the phantom, enter the phantom
name on the source side.
You may also assign the monitor function, VTR control
function, or level select function on the source side.
Notes
• The functions other than select buttons can be used only
in Source mode.
• The monitor function is enabled in RTR mode only.
Calling the setting display of menu item N
Press [N] on the selection display to select menu item N.
The setting display of menu item N appears.
Setting display (example)
SONY ROUTING SYSTEM SETUP MENU
SET PANEL TABLE (SOURCE) CONTROL DESTINATION = OUT017
01 KEY=IN001
05 KEY=IN005
09 KEY=IN009
13 KEY=IN013
17 KEY=IN017
21 KEY=IN021
25 KEY=IN025
: Switching by pairs 29 KEY=IN029
SET RE-ENTRY BUTTON (multi effect key)
M/E1=IN121
SET PANEL TABLE (DESTINATION)
OUT 1
01 KEY=OUT017
OUT 2
05 KEY=OUT021
OUT 3
09 KEY=OUT025
13 KEY=OUT029
OUT 4
0=IN
8=PGM
G=L/A
O=SAT
F1 : MOVE F2 : PgDn Ctrl-E : MENU Ctrl-N : DESCRIP.NAME T : TAKE M : MONI F : SHIFT
The subsequent operation depends on the function to be
set.
To return to the selection display of the Setup
Menu
Press [Ctrl]-[E] on each setting display.
To return to the primary station menu
Press [Ctrl]-[D].
MKS-8082 V1.00
02 KEY=IN002 03 KEY=IN003
06 KEY=IN006 07 KEY=IN007
10 KEY=IN010 11 KEY=IN011
14 KEY=IN014 15 KEY=IN015
18 KEY=IN018 19 KEY=IN019
22 KEY=IN022 23 KEY=IN023
26 KEY=IN026 27 KEY=IN027
30 KEY=IN030 31 KEY=IN031
M/E2=IN122 M/E3=IN123
02 KEY=OUT018 03 KEY=OUT019
06 KEY=OUT022 07 KEY=OUT023
10 KEY=OUT026 11 KEY=OUT027
14 KEY=OUT030 15 KEY=OUT031
1=OUT 2=SONY 3=VTR 4=SUP
9=CL A=SL B=L C=RET
H=REM I=CAM J=STDO K=AUX
P=CG Q=WETH R=TEST S=HD
STATION NUMBER 6
04 KEY=IN004
08 KEY=IN008
12 KEY=IN012
16 KEY=IN016
20 KEY=IN020
24 KEY=IN024
28 KEY=IN028
32 KEY=IN032
P/P1=IN124
04 KEY=OUT020
08 KEY=OUT024
12 KEY=OUT028
16 KEY=OUT032
5=CB 6=AIR 7=ME
D=MIX E=JEEP F=OSC
L=COV M=BS N=CS
T=D1- U=D2- V=SEG
23
Menu Operations