SETTINGS
SETTINGS
Locking the settings
You can lock the settings to prevent them from
being changed.
•
is shown beside the settings that can be
locked.
1
Display the <SETUP Memory> screen.
(Page 40)
2
To unlock the setting: Press [Unlock].
Updating the system
You can update the system by connecting a USB
device containing an update file.
• For updating the system, visit < http://www2.
jvckenwood.com/cs/ce/>.
1
Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 52 .
2
Display the <System Information>
screen.
On the <Top Menu > screen:
3
< Application
Updates the system
Version>
application.
<DVD Version> Updates the DVD system
application.
< System
Updates the system.
Version>
< Bluetooth
Updates the Bluetooth
Version>*
application.
1
<DAB module
Updates the Digital Radio
Version>*
(DAB) module application.
2
It may take a while.
If the update has been completed successfully,
"Update Completed" appears. Reset the unit.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
*
Only for DDX4025DAB/DDX4025BT/DDX4055BT .
1
*
2
Only for DDX4025DAB.
Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1
Display the <Setup> setting screen. (See
the far left column.)
2
Display the <Touch Panel Adjust> screen.
3
Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
ENGLISH
41