Do not install the appliance adjacent to doors and below windows! If not, hot cookware can be hit off the hob when you open doors or windows. ZXE66X 949 594 203 00 220-240 V 50-60-Hz Induction 3,7 kW 58 GAD DA AU Warning! Risk of injury from electrical current.
Page 4
Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm +1 mm min. min. 25 mm 38 mm min. min. min. 5 mm 5 mm 20 mm...
Description of the appliance Cooking surface layout Single cooking zone 1200 W 120/180 Double cooking zone 700/1700 W Induction cooking zone 1400 W Control panel Induction cooking zone 2300 W, with Power func- tion 3700 W Control panel layout Use the sensor fields to operate the appliance. sensor field function starts and stops the hob...
Heat setting displays Display Description The cooking zone is off Keep warm is active The cooking zone operates Automatic heat up function is active The induction cooking zone does not sense the cookware There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety device is on Power function is active The automatic switch off is active...
Page 7
Switching the outer ring on and off Power management You can match the effective heating surface to the size of the cookware. To switch on the outer ring touch the sensor field The indicator comes on. To switch off the outer ring touch the sensor field again.
of the timer to select the time. When the time elapses, • Touch until the acoustic signal. . The symbol the sound operates and flashes. comes on. Switch off the appliance. Locking / unlocking the control panel Switching off the child safety device •...
Energy saving • The bottom of pans and cooking zones must have the same dimension. • If possible, always put the lids on the cookware. Examples of cooking applications • Put cookware on a cooking zone before you start it. The data in the table is for guidance only.
To remove the dirt: – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny met- 1. – Remove immediately: melted plastic, plastic foil, allic discolorations. Use a special cleaning agent and food with sugar. If not, the dirt can cause for glass ceramic or stainless steel.
Problem Possible cause and remedy There is an error in the appliance. and a number come on. Disconnect the appliance from the electrical supply for some time. Discon- nect the fuse from the electrical system of the house. Connect again. If comes on again, speak to the After Sales Service.