Co Message Wait; Disa (Direct Inward System Access); Lcd Language Change; Alarm Reset - LG Aria 186 User Manual

●
aria
186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
CO Message Wait (CLI Message Wait)
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is
displayed on the LCD of the station. If the DISA/DID external party hangs up the call before
answered, the CLI will be stored in the CO message wait queue in the called party.
Button
To retrieve CLI Message,
Press CALLBK button.
●
The stored message will be shown on the LCD.
●
To delete the current CLI message and see the next one,
Press CONF button.
●
To make a callback,
Press HOLD/SAVE button.
●
The stored number is dialed as speed dialing.
●
To see the next/previous CLI message,
Press VOLUME button.
●
To delete all CLI messages,
Press SPEED button twice.
●
If DVU message is stored with CLI message, the CLI message
●
will not be deleted by pressing SPEED button.

DISA (Direct Inward System Access)

Outside caller can access a CO line which is programmed as DISA line.
Button
Dial the CO access code after hearing dial tone or voice guide
●
from DVU.
Or, dial the CO access code after dialing the programmed
●
authorization code (when needed) for outgoing call.

LCD Language Change

Button
Press TRANS/PGM button and dial 5 1
●
The language in LCD is changed into default value.
●
If pressing TRANS/PGM + 5 1, the language
●
in the LCD is changed to the nation's language.

Alarm Reset

Button
To terminate alarm signal while idle state,
Dial * 5 6 5.
●
Confirmation tone is heard and the alarm signal is terminated
●
at all assigned stations.
Procedures
Procedures
Procedures
Procedures
24
Range
Range
Range
Range