HP 2310t User Manual page 31

Table 4-3 OSD Menu (continued)
Icon
ENWW
Main Menu Submenu
Clock
Clock Phase
Horizontal Position
Vertical Position
Custom Scaling
Sharpness
Video Overdrive
Dynamic Contrast
Ratio
OSD Control
Horizontal OSD
Position
Vertical OSD Position
OSD Transparency
OSD Timeout
Management
Power Saver
Description
Minimizes any vertical bars or strips visible on the
screen background (VGA input only). Adjusting the
Clock will also change the horizontal screen image.
Adjusts the focus of the display (VGA input only).
This adjustment allows you to remove any horizontal
noise and clear or sharpen the image of characters.
Adjusts the position of the screen image left and right
(VGA input only).
Adjusts the position of the screen image up and
down (VGA input only).
Selects the method on how displayed information on
the monitor will be formatted. Select:
● Fill to Screen - image fills the entire screen and
may look distorted or elongated because of
non-proportional scaling of height and width
● Fill to Aspect Ratio - image is sized to fit the
screen and maintains proportional image
Adjusts the screen image to look sharper or soft.
Turns Video Overdrive On or Off. The factory default
is Off.
Turns Dynamic Contrast Ratio (DCR) On or Off. The
factory default is Off.
Provides a menu for adjusting the on-screen display
(OSD) controls.
Changes the viewing position of the OSD menu to
the left or right area of the screen. The factory default
range is 50.
Changes the viewing position of the OSD menu to
the top or bottom area of the screen. The factory
default range is 50.
Adjust to view the background information through
the OSD.
Sets the time duration in seconds that the OSD is
visible after the last button is pressed. The range is 5
– 60 seconds. The factory default is 30 seconds.
Selects the OSD and power management features of
the monitor.
Enables the power saving feature. Select:
●
On
●
Off
The factory default is On.
Adjusting the Monitor Settings 23